Product ID:ENAMEL ALKYD GLOSS BLUE 15045, #742506
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004245
MSDS Number: BBPVK

PRATT & LAMBERT/WICHITA, KS 67201

Emergency Phone: (316) 733-1361

Cage: EO743

PRATT AND LAMBERT INC

206 KANSAS CITY, MO 64141 US

Cage: 92216

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR

CAS: 7758-97-6

RTECS: GB2975000

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.05MG/M3(CR)A2;8990

Effects of
Overexposure:HEADACHE/DIZZINESS/CONFUSION/NAUSEA/UNCONSCIOUSNESS/EV
EN ASPHYXIATION. SKIN/EYE: IRRITATION.

First Aid:IF SWALLOWED: CALL PHYS. INHALATION: REMOVE TO FRESH AIR. IF
BREATHING HAS STOPPED, GIVE ARTIFICIAL RESP. EYE: FLUSH W/WATER FOR
AT LEAST 15 MINUTES. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
AFFECTED AREA WITH SOAP/WATER. OBTAIN MED ATT.

Flash Point:80F
Extinguishing Media:CO2, DRY CHEMICAL OR ALCOHOL FOAM
Fire Fighting Procedures:WEAR SCBA. WATER TO COOL CONTAINERS TO PREVENT
PRESS BUILDUP
Unusual Fire/Explosion Hazard:KEEP CONTAINERS CLOSED. CLOSED CONTAINERS
MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES (FLAMES/HOT
SURFACES/SOURCES OF ELECTRICAL/STATIC/FRIIONAL SPARKS).
DIKE/CONTAIN SPILL W/INERT MATERIAL (E.G./SAND/EARTH). PLE
ABSORBENT DIKING MATERIALS IN COVERED META L CONTAINERS FOR
DISPOSAL.

Handling and Storage Precautions:DON'T STORE >95F. DON'T TAKE
INTERNALLY. CLOSE CONTAINER AFTER EACH USE. DON'T BREATHE
SANDINGUST. WASH HANDS/FACE BEFORE EATING OR SMOKING.
Other Precautions:EMPTY CONTAINERS SHOULD BE GROUNDED/BONDED TO THE
RECEIVING CONTAINER. DON'T WELD, BRAZE OR CUT ON EMPTY CONTAINER.
NEVER USPRESSURE TO EMPTY. DRUM ISN'T A PRESSURE VESSEL.

Respiratory Protection:IN CONFINED AREAS USE A NIOSH APPROVED
AIR-SUPPLIED RESPIRATOR
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:WEAR FACE SHIELD
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS DATE: 17 SEPT 86. WT/GAL: 7.6.

Boiling Pt:B.P. Text:193F-395F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62%

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
IGNITION.
Hazardous Decomposition Products:SMOKE/CO/CO2/OXIDES OF LEAD
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND
FLAME.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL/STATE/LOCAL
LAWS. CONTAMINATED ABSORBANT MAY BE DISPOSED IN EPA-PERMITTED
HAZARDOUS WASTE LANDFILLS. DON'T INCINERATE CLOSED CONTAINERS.
OBSERVE PRECAUTIONS FOR DISP OSAL OF FLAMMABLE MATERIALS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.